RGBW CABLE with connector 5X0,35MM²

SKU 44049

Brand TECRICO

$100.00

Quantity

Ask a Quote

Security policy

(edit with the Customer Reassurance module)

Delivery policy

(edit with the Customer Reassurance module)

Return policy

(edit with the Customer Reassurance module)

Description
Product Details

Description

RGBW cable 5x0,35mm² + 1Meter - black

This cable is optimal suitable for our 4in1 RGBW LED strips. All color wires power (RGB and white) have a diameter of 0.35mm². For the common voltage supply (common plus) there is 1,0mm² available. This cable has a PVC jacket and is therefore more flexible than the halogen-free version.

Scope of delivery: RGBW cable - length according to your quantity specification.

This cable is designed for 83045S and 83058.

Note

It can be difficult to solder the common plus wire with 1.0mm² cross section to the sometimes quite narrow solder pads of the LED strip. 2 solutions are available here:

1. after you have stripped the 1.0mm² wire, cut off about half of the individual copper wires again at this end. The now significantly reduced cross-section of the cable is much easier to solder to the LED strip.

2. take a short piece (10cm) of wire with a smaller cross-section, e.g. 0.5mm². Solder this to the LED strip and then connect it to the 1.0mm² positive wire of the RGBW cable. For the connection you can use a WAGO clamp or you lead both cables into a wire end sleeve, crimp them and push (before!) a heat shrink tubing over for insulation.

Max. Current load: 10A total, 3.5A per channel

Temperature range: -5° to +70°C

Outer diameter: 7mm

PVC sheathing

Product Details